Kunshan Meiyaxing Hardware Machinery Co., Ltd. is a direct branch of Hong Kong Meiya International Trading Company in China. It has its own tool brand: MANF and is engaged in CNC tool sales and operation services. We provide tungsten steel milling cutters, milling blades, turning blades, grooving and cutting blades, drilling and boring blades, multi-function blades, threading blades and other indexable blades as well as supporting tool holders and cutterheads. We have also reached long-term strategic cooperation with a number of well-known production factories. Both parties jointly develop, design, and produce teams, advanced equipment, and constantly innovative and progressive technical strength. We are committed to mutual cooperation and are guided by technical services to form a mutually dependent industrial chain to solve various processing problems for processing and manufacturing enterprises.
In the liquid cooling processing workshop, there are more and more jobs using 316L stainless steel. The drawings of the cold plate flow channel, manifold valve block, and joint housing were piled up, and the materials all read SUS316L. Use an ordinary stainless steel milling cutter to work on it. The first few pieces seem to be fine, but after more than a dozen pieces, things start to go wrong: chips stick to the edge, the inner wall of the flow channel pulls out the knife pattern, the thin-walled ribs vibrate when the cutter passes, and the tool life is so short that it cannot be replaced. The liquid-cooled stainless steel milling cutter is designed to solve this problem. It is not a "stainless steel milling cutter with a new package", but a systematic matching of the cutting characteristics of 316L in terms of base body, geometry, coating, and edge treatment. If you use it at the right time, it will solve the yield problem; if you use it in the wrong scenario, it will become an ordinary knife that is more expensive.
In the liquid cooling processing workshop, there are more and more jobs using 316L stainless steel. The drawings of the cold plate flow channel, manifold valve block, and joint housing were piled up, and the materials all read SUS316L. Use an ordinary stainless steel milling cutter to work on it. The first few pieces seem to be fine, but after more than a dozen pieces, things start to go wrong: chips stick to the edge, the inner wall of the flow channel pulls out the knife pattern, the thin-walled ribs vibrate when the cutter passes, and the tool life is so short that it cannot be replaced. The liquid-cooled stainless steel milling cutter is designed to solve this problem. It is not a "stainless steel milling cutter with a new package", but a systematic matching of the cutting characteristics of 316L in terms of base body, geometry, coating, and edge treatment. If you use it at the right time, it will solve the yield problem; if you use it in the wrong scenario, it will become an ordinary knife that is more expensive.
Once the quality of the inner wall of the flow channel is stable, the subsequent helium inspection will be passable. The liquid cooling plate must eventually pass an air tightness test, and tiny burrs, scratches, and debris residue on the inner wall of the flow channel may become leakage points. The anti-stick coating and groove shape of the special milling cutter are matched to stably control the inner wall roughness within the required range. Sinovel's actual measured data is very illustrative of the problem: under the roughing conditions of face milling, the tool life of competing products is 10 pieces, while the Sinovel NM series achieves 27 pieces, and this is under the same cutting parameters and oil cooling conditions. In Arnold's comparative test of the liquid-cooled manifold valve block, the average number of competing products was 300 pieces, while the number of special-purpose tools stably reached more than 500 pieces. Rough and finishing machining can be completed with the same tool, reducing the number of tool changes. Behind the life figure is the stability of the yield: when the frequency of tool changes is reduced, the difference in processing conditions between the first and last parts will be smaller, and batch consistency can be guaranteed.
Only when thin-wall deformation and vibration marks are controlled can there be room for upward exploration of parameters. The anti-seismic design of the special milling cutter eliminates the need for operators to choose between "chatter" and "low efficiency". Shuoshuo's recommended strategy for the 316L liquid cooling plate is to use dynamic milling with unequal cutters, use large chip flutes to ensure chip removal when thickening thin-walled flow channels, and use deep grooves and long neck versions for anti-seismic treatment. Arnold's case on the liquid-cooled casing of new energy vehicles is more typical: the arc-shaped deep cavity and annular groove on the end face are processed with large depth and long overhang. The ordinary knife vibrates as soon as it is put up. The special knife customized the groove shape to solve the problem of mass production stability. Improved rigidity not only brings surface quality, but also increases the upper limit of cutting parameters. The dedicated design of Sandvik's CoroMill Plura series for stainless steel also emphasizes unequal spirals and differentiated chip flutes to maintain stable chip evacuation and low vibration under high-feed side milling strategies.
The cost of a single tool is even lower when calculated in the general ledger. The single-piece price of special-purpose knives is definitely higher than that of general-purpose knives, but liquid-cooling processing counts as "cost per tool." In the case of Sinovel, the tool life has been increased from 10 pieces to 27 pieces, and the tool cost per piece has been cut in half. Kyocera's case of liquid-cooled joint valve cores is even more exaggerated: the PR17 blade can be roughened and fined with one cut, its service life is increased by 313% from the level of competing products, a single blade can process 2,500 pieces, and the frequency of tool changes is greatly reduced. For mass production lines, the time cost of tool change downtime is often much more expensive than the blade itself. Special knives reduce the hidden cost of "number of tool changes" and the overall account can be calculated.
Don't be too impatient: under what circumstances is it not cost-effective?
The premise of liquid-cooled special stainless steel milling cutters is "batch, continuous, 316L". If it is just the prototyping stage and a few casual jobs, it will be cheaper to use a general stainless steel milling cutter with conservative parameters and go slowly. Arnold himself also suggested using a standard round-nose knife to verify the yield on samples first, and then evaluate the special knife after mass production.
In addition, special tools solve the problem of milling process. The end face grooves, inner hole grooves, threads, and blind hole chip removal on the liquid cooling joint are the work of turning inserts and drill bits. In the liquid cooling solutions of Kyocera and many tool manufacturers, milling cutters and turning inserts are matched separately. It is unrealistic to use a milling cutter to go through all the processes.
One more thing: cooling methods must keep up. Dry cutting is strictly prohibited when processing 316L, and micro-quantity lubrication (MQL) is not recommended. Insufficient heat dissipation will inevitably cause the knife to stick. The coating and groove design of the special knife work on the premise of sufficient cooling. If the cooling cannot keep up, no matter how good the knife is, it will not be able to hold up.
The value of liquid-cooled special stainless steel milling cutters lies in changing the "difficult machining" of 316L from uncontrollable to predictable. When you find that the workshop is repeatedly troubled by three things: knife sticking, vibration marks, and short lifespan, and you can only choose between "collapse" and "low efficiency" after adjusting parameters, then changing to this knife is not a consumption upgrade, but a stop loss.
If you have any questions about MANF brand tools, please call us for consultation or negotiation"
Contact us:Company name:Kunshan Meiyaxing Hardware Machinery Co., Ltd;Tel:8618962438699;Address: Room 3003, Building 3, Zhengtailong, No. 1288 Chengbei Middle Road, Kunshan City, Jiangsu Province, China;Email:myxcuttingtools@gmail.com;Website: https://www.myxcuttingtools.com




