Cylindrical milling cutter
It is used for machining flat surfaces on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to the tooth shape. According to the number of teeth, there are two types: coarse teeth and fine teeth. Helical coarse teeth milling cutter has a small number of teeth, high tooth strength and large chip holding space, which is suitable for roughing, and fine tooth milling cutter is suitable for finishing.
Face mills
Also known as disc milling cutter, it is used for machining planes on vertical milling machines, end milling machines or gantry milling machines, and there are cutter teeth on the end face and circumference, as well as coarse teeth and fine teeth. There are 3 types of structures: monolithic, toothed and indexable.
End mills
It is used for processing grooves and step surfaces, etc., and the cutter teeth are on the circumferential and end faces, and cannot be fed along the axial direction when working. When the end mill has an end tooth that passes through the center, it can be fed axially.
Side and side milling cutters
It is used to machine various grooves and step surfaces, and there are cutter teeth on both sides and circumference.
Angle milling cutter
It is used to mill grooves at a certain angle, and there are two types of single angle and double angle milling cutters.
Saw blade milling cutter
It is used for machining deep grooves and parting workpieces, and there are more cutter teeth on its circumference. In order to reduce friction during milling, there is a secondary declination angle of 15′~1° on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail milling cutters, T-slot milling cutters, and various forming milling cutters, among others.
T-shaped milling cutter
It is used to mill T-slots.
