HRC55 Colored Aluminum End Mill
2. Origin: China
3. Hardness: HRC55°
3. Type: DCL ball end milling cutter for aluminum
4. Processing material: Aluminum alloy copper alloy
Product Parameters
HRC55 Colored aluminum End Mill,DCL coating, more wear-resistant than uncoated aluminum ball cutter, longer life.High hard coatings are more wear resistant
High finish is not easy to stick
1. Brand name :MANF
2. Hardness :HRC55°
3. Helix Angle: 45°
4.Blade belt: Double blade belt
5. Coating or not: DLC Coating
6. Type :Ball milling cutter for colored aluminum
7. Flute :2 Flute
8. Semi-diameter: R0.5mm-R6mm
9. Total length :50-150mm
10. Advantages: diamond film, crystal film, high carbide
11. Processing materials: Aluminum alloy, copper alloy, magnesium alloy, acrylic, wood, and non-ferrous metals
12.Note: not suitable for processing steel hard materials, not suitable for hand drill, bench drill
Model Number
|
Specification |
Radius(1/2∅) |
C |
L |
D |
| R0.5*4D*50L*2T DLC | R0.5 | 2.0 | 50 | 4 |
| R0.75*4D*50L*2T DLC | R0.75 | 3.0 | 50 | 4 |
| R1*4D*50L*2T DLC | R1 | 4.0 | 50 | 4 |
| R1.25*4D*50L*2T DLC | R1.25 | 5.0 | 50 | 4 |
| R1.5*3D*50L*2T DLC | R1.5 | 6.0 | 50 | 3 |
| R1.5*4D*50L*2T DLC | R1.5 | 6.0 | 50 | 4 |
| R1.75*4D*50L*2T DLC | R1.75 | 7.0 | 50 | 4 |
|
R2*4D*50L*2T DLC |
R2 | 8.0 | 50 | 4 |
| R2.5*5D*50L*2T DLC | R2.5 | 8.0 | 50 | 5 |
|
R2.5*6D*50L*2T DLC |
R2.5 | 8.0 | 50 | 6 |
| R3*6D*50L*2T DLC | R3 | 9.0 | 50 | 6 |
| R4*8D*60L*2T DLC | R4 | 12.0 | 60 | 8 |
|
R1.5*3D*75L*2T DLC |
R1.5 | 4.0 | 75 | 3 |
|
R2*4D*75L*2T DLC |
R2 | 8.0 | 75 | 4 |
| R2.5*5D*75L*2T DLC | R2.5 | 10.0 | 75 | 5 |
|
R3*6D*75L*2T DLC |
R3 | 12.0 | 75 | 6 |
|
R4*8D*75L*2T DLC |
R4 | 16.0 | 75 | 8 |
| R5*10D*75L*2T DLC | R5 | 15.0 | 75 | 10 |
|
R6*12D*75L*2T DLC |
R6 | 18.0 | 75 | 12 |
| R1.5*3D*100L*2T DLC | R1.5 | 6.0 | 100 | 3 |
|
R2*4D*100L*2T DLC |
R2 | 8.0 | 100 | 4 |
| R2.5*5D*100L*2T DLC | R2.5 | 10.0 | 100 | 5 |
|
R3*6D*100L*2T DLC |
R3 | 12.0 | 100 | 6 |
| R4*8D*100L*2T DLC | R4 | 16.0 | 100 | 8 |
| R5*10D*100L*2T DLC | R5 | 20.0 | 100 | 10 |
|
R6*12D*100L*2T DLC |
R6 | 24.0 | 100 | 12 |
|
R7*14D*100L*2T DLC |
R7 | 24.0 | 100 | 14 |
|
R8*16D*100L*2T DLC |
R8 | 24.0 | 100 | 16 |
| R10*20D*100L*2T DLC | R10 | 30.0 | 100 | 20 |
| R3*6D*150L*2T DLC | R3 | 12.0 | 150 | 6 |
| R4*8D*150L*2T DLC | R4 | 16.0 | 150 | 8 |
| R5*10D*150L*2T DLC | R5 | 20.0 | 150 | 10 |
| R6*12D*150L*2T DLC | R6 | 24.0 | 150 | 12 |
Performance Advantage
3.Perfomrance advantage:
HRC55 Colored aluminum End Mill, can process all kinds of aluminum alloy, copper alloy and all kinds of soft materials, easy to stick knife metal products. MANF has always insisted on good quality to do a good job, the use of imported tungsten steel, 0.6um micro-particle tungsten steel raw materials, with higher wear resistance and strength, with high hardness high-speed cutting applications of special milling cutter. The whole process from rough milling to finish milling can be done directly without changing the tool. The whole tungsten steel is formed once, reducing the broken knife, the high light mirror in the groove, good finish, 45° spiral Angle, large core diameter design, will not stick.
4.Instructions for use:
1: Before using the tool, please measure the tool yaw. When the tool yaw accuracy exceeds 0.01mm,
Please correct before cutting.
2. The shorter the length of the tool extension chuck, the better. If the tool extension is longer, it needs to be reduced
Speed, feed rate, or amount of cutting.
3. In the cutting process, if abnormal vibration or sound occurs, please reduce the speed and cutting amount.
Until the situation improves.
4. Steel cooling with spray and jet can improve the effect of milling cutter.
5. Note: It is not suitable for low-speed machines such as bench drill and electric drill
About Transportation
Our Services
On-time delivery
Technical support
If you are unhappy with our servicr or any other problem,please contact us before leaving feedback and we will resolve the issue immediately,thank you!
We use DHL, UPS, Fedex, China Post and other transportation methods, convenient and accurate delivery to you.
Hot Tags: hrc55 colored aluminum end mill, China hrc55 colored aluminum end mill manufacturers, suppliers, factory, stfcr25, sdjcl 2525 m11, ,
Previous
No InformationYou Might Also Like
Send Inquiry