Knowledge

Tungsten carbide inserts are mainly made of solid carbide as the matrix and are finished through multiple production processes. Tungsten carbide, also known as tungsten steel, is m

Thread turning is a very common and complex problem in machining. The requirements for thread turning are higher than those of other ordinary turning operations, and the cutting fo

1. Radial feed method When turning threads, the left and right blades of the turning tool participate in the cutting, which is fed transversely by the middle slide plate, and passe

There are many processing methods for threads, among which the method of turning is a commonly used processing method. Regardless of the type of thread being turned, a tight motion

There are many types of threads, which can be divided into connection threads and transmission threads according to the use, triangular threads, square threads, sawn threads and ci

The arc radius rε and the secondary declination angle κr' are generally selected according to the requirements of the machining surface roughness. The inclination

The cutting part of the turning tool is composed of the main cutting edge, the secondary cutting edge, the rake face, the flank face and the secondary flank face. Its geometry is d

A turning tool is a tool used for turning operations and has one cutting section. Turning tools are one of the most widely used tools in machining. The working part of the turning